Do you know that the bathroom is now populated with glass?
[China Glass Net] Glass has been very common as a partition. It will be transparent and transparent. It is today that we talk about the use of glass in the bathroom.
The practice of bathroom glass partition wall: 1. Firstly, the floor tile and wall brick should be paved first, then the sanitary partition should be customized according to the actual size. It should be noted that the upper and lower walls may be in error. The glass partition is customized according to the actual size. The wall is easy to install and use. 2. Before laying the floor tiles, remember to install the water pipe and install the floor drain. Then install the door frame when installing the partition. The door frame can be used to block the water. If there is no door frame, it is necessary to install the door stone. The door stone should be 1.5-2 cm above the ground. Otherwise, the shower water can not reach the wet and dry zone. The purpose is. 3. When installing the glass partition wall, remember to never use the glide path because the water and dust in the slide are difficult to clean.
4, do not choose jade glass partition, jade glass will become transparent after encountering water, it will cause a lot of inconvenience. 5, in order to extend the service life of the partition, usually after the bath is finished, it is better to wipe it with a dry cloth. If there is water stain, then you can use white vinegar to gently spray on the surface of the glass. After a period of time, you can use the cloth. Wipe it.
Note on the practice of bathroom glass partition wall: When the bathroom is renovated, it is necessary to pay special attention to the waterproof treatment. If the bathroom glass partition wall is not installed well, it will cause the drainage system of the bathroom to be blocked.
100% Polyester Shirt,Men'S Print Shirt,Stand-Up Collar Shirt,Short Sleeve Print Shirt
SHAOXING GUANGQI TRADING CO.,LTD , https://www.sxgqtrading.com