As we all know, the water dispenser is usually placed on the "smart seat" of the water dispenser after the barrel neck of the bottled water is turned over, and then the water is introduced into the two water bladders by the hose inside the machine, one of which is hot water, one It is cold water. In addition to functioning as hot and cold water, these two water bladders also act to precipitate impurities in the water.
Most people think this way: the water dispenser itself is a water purification device, and the bottled mineral water is clean. Even if the water dispenser is not regularly cleaned and disinfected, there will be no problem.
actually not. Director of the Environment and School Health Center of the Guangdong Provincial Center for Disease Control and Prevention, He Changyun, said that people often repeat the replacement of bottled water, but they ignore the water in the tank. There is still a certain amount of water in the water, which will hide the pathogenic bacteria. Naturally, it has become a breeding ground for bacteria. "So, the water dispenser must be regularly cleaned and disinfected by professionals." He Changyun said.
If you want to clean yourself, what should you do? He Changyun introduced that the current common method is to wash with a professional disinfectant, and then use a clean bottled water to flush the dispenser until the residue of the disinfectant is washed. Specific steps are as follows:
1 Cut off the power of the water dispenser;
2 Turn on the red hot water faucet and the blue cold water faucet until the water is released, then turn off the faucet, then use both hands to hold the bottle body and take out the water bottle;
3 Clean the outside of the dispenser and the smart seat;
4 Pour 600ml special cleaning and disinfecting solution (such as sodium hypochlorite which can be used for drinking water disinfection) into the water storage tank;
5 After 10 minutes, turn on the red and blue taps until the disinfectant is discharged;
6 Unscrew the back or bottom drain valve of the machine to drain the disinfectant in the dispenser;
7 Rinse several times with boiling water or pure water, and let the water stay in the machine for a few minutes before pouring water;
8 Tighten the drain valve and the disinfection and sterilization procedures are completed.
(Editor: Xu Xiaoyu)
Seam Sealing Tape For Raincoat,Waterproof Seam Sealing Tape For Jacket,Tent Tape Seal,Heat Seal Tape For Fabric
Jiangmen M.F.B.S. Machinery Ltd. , https://www.newpowerhk.com